Using CGDI FC200 and FC200 DAP Adapter to Read a Toyota ECU

This guide demonstrates the process of reading a Toyota ECU using the CGDI FC200 tool and the FC200 DAP adapter.

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-1

Connection Steps:

1. Connect the adapters in the correct sequence.

2. Refer to the wiring diagram and connect all pins accordingly.

3. Connect the device to a USB port and power supply.

4. Connect the host cable to the adapter, with the other end attached to your computer.

5. All connections are now complete.


using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-2

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-3

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-4

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-5

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-6

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-7

Software Operation:

1. On your computer, open the FC200 software and enter the specific ECU model.

2. Click "Connect." Once the connection is successfully established, proceed to read the Pflash memory.

3. After saving the data, the task is complete.

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-8

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-9

using-cgdi-fc200-and-dap-adapter-to-read-a-toyota-ecu-10

For a visual walkthrough, please refer to the video guide:


Tools available at: www.obd2shop.co.uk


Comments

Post a Comment

Popular posts from this blog

Free download CGDI Prog MB key programmer software V2.8.1.0

Good news!!  CGDI MB key programmer can be updated to V2.8.1.0. Here provides you the free download link and more details. CGDI MB V2.8.1.0 download: http://www.cgprogcar.com/en/?c=list&cs=xiazaizhongxin CGDI MB V2.8.1.0 update content: Update time: 2018.12.19 1. Added K-line all lost collection support EIS Model    202/208/210, 203/463/639 2. Optimize the Keyless repeatedly plug collecting process    Fix problems that can cause program errors in specific situations in the collection. 3. Optimize network connectivity and improve server connectivity stability. 4. Software display language increases regional restrictions.    Devices sold in the China region can only use Simplified Chinese. You may interest: CGDI ELV Emulator renew ESL for Benz 204 207 212 with CGDI MB CGDI MB Mercedes Benz Key Programmer FAQ (Most Comprehensive)
Read more

W164 2009 +/W221 2009+ All Key lost with CGDI MB in 10 minutes

Image
In the past: CGDI MB collected data from EIS when W164 2009 +/W221 2009+ All Key lost, it cost about 2 hours.  Here a user's experience, if you had the same experience, you can skip to the next part. I did it today (EIS on the bench) w164 eis A1645451508 new type pulling dump took 80 minutes calculating pass online 4 min. key programmed !!! w164 after 2009 I did for testing 2 types of programming _ have got EZS with both programmed keys because customer claimed sometimes EIS works sometimes doesn't - I have found that connector for immo aerial was desoldered from PCB so when I fixed it - EIS became fully working again - and then I started testing CGDI and made 2 types of programming (all programming on bench - EZS + GATEWAY EMULATOR) 1) programming in case one key is available and adding spare key - ALL OK! 2) programming in case of ALL KEYS LOST - ALL OK! spare key programming was pretty fast AKL scenario takes circa 80minutes to get data from EIS and You hav...
Read more

CG100X Software Download, installation and activation

Image
This post will guide you on how to download, install, and activate the software of the CGDI CG100X programmer . CG100X Software Download: https://mega.nz/folder/3CIXXDJC#jJ4CdJ9T-eEYhkBYi6Z65A Click the link above to open the CG100X folder and download it to your computer. CG100X Software installation and activation: Connect CG100X to the computer with a USB cable, and then open the software installed on the computer. Follow the prompts and select "Install" to complete the software installation. Open "CG100X, it "prompts" "The device is not active, can not be used." "Before activation, please log in to your account and bind your device." Click "OK" to continue. It comes to the current interface and selects "No account? Create one!" Fill in the following information and click "Next". Choose one of the following two methods for verification. Here we use email verification. Click "Get verification code"....
Read more