How to solve CGDI MB erase 7G TCU I error "erase failed" ?

Question: When I try to use the erase password with CGDI MB Programmer to erase 7G TCU I get error message that says erase failed. 2012 S63 AMG 722.931 Do I need to remove the TCU and do it on the bench and not in the car?

Experienced user said:
I saw on YouTube ECU reset process with CGDI, there was a fault to reset several times. And he just read, tries to reset, read again. And after 6-7 time fault occurred after reading ECU was renewed. So maybe you should try to do it several times.
I was reading 7g at Friday, got an erase password, but I didn't try to reset. Cause I have another job to do on it. But when I come back to work I will do what I need and try to reset TCU. I just need some time to get healthy.

Official how-to guide:
How to use CGDI MB programmer to reset Mercedes ECU ME9.7 on Bench with success.
http://blog.obd2shop.co.uk/how-to-use-cgdi-mb-to-read-erase-mb-ecu-me9-7-on-bench/

cgdi-mb-reset-ecu-me9-7-on-bench-01

cgdi-mb-reset-ecu-me9-7-on-bench-02

cgdi-mb-reset-ecu-me9-7-on-bench-03

cgdi-mb-reset-ecu-me9-7-on-bench-04



Look here: TCU 722.9 reset ok. Did 2 TCU's: VGS2 and VGS3.
cgdi-mb-reset-ecu-me9-7-on-bench-06


Good luck!
http://blog.obd2shop.co.uk/how-to-solve-cgdi-mb-erase-7g-tcu-i-error-erase-failed/


Comments

Popular posts from this blog

W164 2009 +/W221 2009+ All Key lost with CGDI MB in 10 minutes

Free download CGDI Prog MB key programmer software V2.8.1.0

CGDI Prog MB key programmer software V2.8.0.0 download