CGDI Prog For BMW and Benz

This guide demonstrates the process of reading a Toyota ECU using the CGDI FC200 tool and the FC200 DAP adapter . Connection Steps: 1. Connect the adapters in the correct sequence. 2. Refer to the wiring diagram and connect all pins accordingly. 3. Connect the device to a USB port and power supply. 4. Connect the host cable to the adapter, with the other end attached to your computer. 5. All connections are now complete. Software Operation: 1. On your computer, open the FC200 software and enter the specific ECU model. 2. Click "Connect." Once the connection is successfully established, proceed to read the Pflash memory. 3. After saving the data, the task is complete. For a visual walkthrough, please refer to the video guide: Tools available at: www.obd2shop.co.uk

The CGDI K2 is a versatile remote key programmer that generates, copies, and reprograms car keys and remotes. Follow this simple guide to get started. 1. First-Time Setup (1) Press and hold the power button to turn on. (2) Connect to Wi-Fi to activate the device and update software/firmware. (3) Log in to your CGDI account, or create one if you don't have one. 2. Basic Controls (1) Short-press the power button: turns the screen on/off. (2) Hold the power button for 5 seconds: forces a shutdown. (3) Device auto-shuts down when battery is below 5%. (4) Charge using a 4.5V–5.5V/1A charger and Type-C cable. Main Functions 1. Generate Wireless Remote ① Go to Remote Generation from the home screen. ② Select your car model. ③ Connect the remote to the device using the programming cable. ④ Choose Wired Generation and confirm. 2. Generate Smart Remote ① Select the car model. ② Place the CG Smart Key on the device coil. ③ Click Generate Remote and wait for completion. 3. Frequency Detectio...